Lana Lounger Pool Float

Fabric: Crafted from premium 100% Olefin fabric, selected for its durability, UV resistance and suitability for outdoor and pool use.

Getting your Lana out of the pool: Your Lana will hold water and become heavy after floating. Before lifting it out, raise one end with the mesh drainage area facing down and give the water time to drain. Once lighter, remove it from the pool and allow it to dry thoroughly. View video below.

Cleaning & drying: The outer cover can be removed and machine washed on a gentle, cold cycle. Lay flat to dry. Do not tumble dry. Make sure the inner bags and bean filling are completely dry before storing to help prevent mould and mildew.

After pool use: Rinse with fresh water after exposure to chlorine or salt water and allow your Lana to dry thoroughly between uses. Do not leave it permanently in the pool. For best longevity, store out of direct sunlight when not in use for extended periods.

View our Bean Bag Care Instructions for more care and cleaning tips.

Important Safety Information

WARNING: This is NOT a toy or life-saving device. Adult supervision is required whenever children are using the Lana in or around water. Keep away from rough water and sharp objects, and do not stand, jump or dive onto the float.

WARNING: Bean bag filling can cause suffocation if swallowed or inhaled. Children must not be allowed to climb inside the bean bag. Not a safe sleeping surface for infants under 12 months of age.

Child-Safe Zippers: For safety, the zipper pullers have been removed to help prevent children from accessing the filling. A paper clip can be used to open and close the zipper.

Regular rinsing, thorough drying and proper storage will help keep your Lana Lounger looking beautiful for summers to come.

600 - 700L of Bean Filling Recommended

How to Fill & Shape Your Bean Bag

What's Included:

• The Lana Olefin Cover (main cover)
• 2 x large white mesh Inner liners
• 1 x small white mesh inner liners

What you’ll need

• 700L of Polystyrene bean filling (not included)
• Inner mesh liner included with your bean bag
• A wide-mouth funnel (or make one from cardboard)
• Scissors
• A helper (highly recommended)
• A contained space like a bath
• A paperclip

Step-By-Step Instructions

1. Set up your space

Set up in a small, enclosed area such as a bathroom or over a plugged bath. This makes it easier to catch any stray beans. Keep windows and doors closed to prevent them blowing around.

Please keep children and pets out of the room - the beans are tiny and can be a choking hazard.

2. Open the child-safe zippers

All of our bean bags have safety zippers without a pull tab. You can slide a paperclip or safety pin through the eyelet to gently open the zip. Remove it once closed again.

3. Fill the INNER MESH LINERS first

Place the outer cover aside for now.

There are 3 x inner liners with the Lana Loungers

The small inner liner is placed at the headrest. Aim for approximately 100L.

The 2 x large inner liners are for the bottom and leg area and will need between 250 - 300L of bean filling in each.

To fill each white mesh inner liner, simply:

Open the inner liner and insert your funnel.

Cut a small corner off the bean filling bag (NOT OURS, THE PLASTIC BEAN FILLING BAG) so you can control the pour.

One person holds the liner steady while the other pours the beans in slowly.

4. Fill in stages - don’t rush it

Add some beans, close the liner temporarily, give it a gentle shake and pat to let the filling settle, and check the firmness.

You’re aiming for supportive, not rock-hard. Most people prefer the liner about 75–85% full so it can mould comfortably when you sit.

Do not fill the liner to full capacity - they will be too full.

5. Seal the liner completely

Once you’re happy with the fill level, zip the liner closed securely.

6. Insert the liner into the outer cover

Now place each of the the filled liners into the bean bag.

The smaller inner liner, needs to be lined up with the headrest. There is a Vicro wrap to hold it in place. Do it up the best you can (it does not have to be perfect).

We then recommend putting in the large inner liner at the other end, where there is another velcro wrap - again do it up the best you can, but it doesn't have to be perfect, just enough to hold in place.

Finally, place the final larger inner liner in the middle.

7. Close & shape

Zip the outer cover closed, then give the bean bag a few shakes, pats and rolls. Sit in it, lean back, move around a little - this helps the filling settle into place.

If you’d like it firmer, simply remove the liner and add a touch more filling. It’s always easier to add than to have to remove filling.

Shaping Tips

• Make sure the inner liner sits neatly inside the cover with the seams and zippers lined up. You can usually tell where everything needs to go by matching the liner seams and zipper position with the seams on the outer cover.

• You may need to gently push, pat and play with the liner for a little while to guide the filling into place and create the right shape. Think of it like fluffing a pillow - a little adjustment makes a big difference.

• If the bean bag still isn’t holding its shape, it usually means either the liner isn’t positioned correctly or it simply needs a little more filling.

• And remember — they’re bean bags, so they may need an occasional fluff and reshape to keep them looking their best.

Safety Notes

• Always keep zippers fully closed when finished
• Keep filling away from children and pets
• Fill slowly to reduce static and mess

Shipping & Delivery – Canada

Orders are dispatched from our Gold Coast, Australia warehouse within 24 hours (Mon–Fri, excl. public holidays & peak sales periods).

Order cut-off: 2pm AEST – orders placed after this time ship the next business day.

We deliver to Canada via Australia Post International.

• Standard Shipping: $29.95 (7-14 business days)
• Express Shipping: Calculated at checkout (3–6 business days)

Please read our Shipping Policy in full

Customs & Import Taxes

For Canadian orders, duties and taxes are assessed by Canadian customs when your parcel arrives in Canada and (if deemed applicable) are payable before delivery.

As our bean bag covers are classified as textile home furnishings, customers may be charged GST/HST and applicable import duty, typically totalling approximately 15–30% of the order value, depending on your province.

Please note these charges are not set or collected by us and are not included in the product price or shipping fee — they are determined by Canadian customs authorities and paid directly to the carrier prior to delivery.

Returns

30-day returns for refund or exchange

Sale item returns subject to our Returns Policy

Please read our Returns Policy in full before lodging a return