Lachlan Sunlounger

Made from premium 100% Olefin outdoor fabric, the Lachlan Sunlounger is designed for outdoor living with excellent UV resistance, colour fastness and resistance to water, stains, mould and mildew.

Everyday Cleaning: For general dirt, spills and marks, clean with warm soapy water and a soft cloth or brush. Rinse with fresh water, then elevate the lounger and allow it to dry thoroughly.

Washing & Drying: For tougher stains, remove the outer cover and machine wash on a gentle, cold cycle. Lay flat to air dry. Do not tumble dry, bleach, iron or dry clean.

After Getting Wet: If your Lachlan gets caught in the rain or becomes wet, remove the cover and allow the cover, inner bags and bean filling to dry completely before reassembling or storing.

Storage: Olefin is designed for outdoor use, but all outdoor fabrics benefit from a little protection. Store your Lachlan undercover or out of prolonged direct sunlight when not in use for extended periods to help maintain its appearance and extend its life.

Poolside Only: The Lachlan Sunlounger is made for relaxing around the pool, garden, patio or deck — not in the pool. It should not be submerged in water.

Need more care tips? View our complete Bean Bag Care Instructions for more advice on cleaning, drying and storing your bean bag.

Important Safety Information

WARNING: Bean bag filling may cause suffocation if swallowed or inhaled. Do not allow children to climb inside the bean bag. Bean bags are not a safe sleeping surface for infants under 12 months of age.

Child-Safe Zippers: To help prevent children from accessing the filling, zipper pullers have been removed. Use a paper clip to open and close the zipper when required.

How to Fill & Shape Your Bean Bag

What's Included:

• The Lachlan Olefin Cover (main)
• 1 x Mesh Inner Liner

What extras you’ll need

• 540L Polystyrene Bean Filling (not included)
• Inner mesh liner included with your bean bag
• A wide-mouth funnel (or make one from cardboard)
• Scissors
• A helper (highly recommended)
• A contained space like a bath
• A paperclip

Step-By-Step Instructions

1. Set up your space

Set up in a small, enclosed area such as a bathroom or over a plugged bath. This makes it easier to catch any stray beans. Keep windows and doors closed to prevent them blowing around.

Please keep children and pets out of the room - the beans are tiny and can be a choking hazard.

2. Open the child-safe zippers

All of our bean bags have safety zippers without a pull tab. You can slide a paperclip or safety pin through the eyelet to gently open the zip. Remove it once closed again.

3. Fill the INNER MESH LINER first

Place the outer cover aside for now.

Open the white inner mesh liner and insert your funnel. Cut a small corner off the bean filling bag (NOT THE MESH LINER, THE PLASTIC BEAN FILLING BAG) so you can control the pour.

One person holds the liner steady while the other pours slowly.

4. Fill in stages - don’t rush it

Add some beans, close the liner temporarily, give it a gentle shake and pat to let the filling settle, and check the firmness.

You’re aiming for supportive, not rock-hard.

You're best to under-fill, than over fill. Test occasionally until you are happy with the firmness.

5. Seal the liner completely

Once you’re happy with the fill level, zip the liner closed securely.

6. Insert the liner into the outer cover

Now place the filled liner inside the outer cover. Guide the liner gently into the corners and try to line up the seams and zippers so everything sits neatly.

7. Close & shape

Zip the outer cover closed, then give the bean bag a few shakes, pats and rolls. Sit in it, lean back, move around a little - this helps the filling settle into place.

If you’d like it firmer, simply remove the liner and add a touch more filling. It’s always easier to add than to have to remove filling.

Shaping Tips

• Make sure the inner liner sits neatly inside the cover with the seams and zippers lined up. You can usually tell where everything needs to go by matching the liner seams and zipper position with the seams on the outer cover.

• You may need to gently push, pat and play with the liner for a little while to guide the filling into place and create the right shape. Think of it like fluffing a pillow - a little adjustment makes a big difference.

• If the bean bag still isn’t holding its shape, it usually means either the liner isn’t positioned correctly or it simply needs a little more filling.

• And remember — they’re bean bags, so they may need an occasional fluff and reshape to keep them looking their best.

Safety Notes

• Always keep zippers fully closed when finished
• Keep filling away from children and pets
• Fill slowly to reduce static and mess

Shipping & Delivery – Canada

Orders are dispatched from our Gold Coast, Australia warehouse within 24 hours (Mon–Fri, excl. public holidays & peak sales periods).

Order cut-off: 2pm AEST – orders placed after this time ship the next business day.

We deliver to Canada via Australia Post International.

• Standard Shipping: $29.95 (7-14 business days)
• Express Shipping: Calculated at checkout (3–6 business days)

Please read our Shipping Policy in full

Customs & Import Taxes

For Canadian orders, duties and taxes are assessed by Canadian customs when your parcel arrives in Canada and (if deemed applicable) are payable before delivery.

As our bean bag covers are classified as textile home furnishings, customers may be charged GST/HST and applicable import duty, typically totalling approximately 15–30% of the order value, depending on your province.

Please note these charges are not set or collected by us and are not included in the product price or shipping fee — they are determined by Canadian customs authorities and paid directly to the carrier prior to delivery.

Returns

30-day returns for refund or exchange

Sale item returns subject to our Returns Policy

Please read our Returns Policy in full before lodging a return